| |
Telemetry/SCADA/IMS System Licensing
Prices on application.
Each system is limited only by the number of stations and/or
points that can be configured within the Master station's database. A
telemetry point may be a digital (status) point, an analogue point or
a totalised counter point. Each system is fully upgradeable and can be
expanded reutilising the existing hardware and software components to
accommodate practically any size of database, any number of local/remote
workstation users and practically any number of protocols to communicate
with a variety of remote devices (outstations, data loggers, PLCs etc.).
The workstation software is supplied free issue, the number
of users on a system is controlled solely by the PC6-SQL licensing.
Telemetry Data
Each configured
station typically identifies a remote device that has associated with it a
number of telemetry points, control points and archived data. As standard
the system supports the following types of telemetry and control points.
Digital input points,
maximum of 1,024 points per station.
Analogue input points,
maximum of 512 points per station.
Totalised input points,
maximum of 256 points per station.
Digital command points,
maximum of 1,024 points per station.
Analogue set points,
maximum of 512 points per station.
PC6 RTU Systems
All RTU system licenses are intended for use at remote unmanned
sites operating as Remote Telemetry Units providing typical outstation
and data logging facilities. These systems include all printing, management
report, alarm paging, SQL based IMS and associated Web interface functions.
An internal text only workstation is supplied to assist configuration,
maintenance and system administration.
Small systems are typically based on Mini-ITX (or Nano-ITX)
hardware platforms equipped with bootable hard disk drives and data logging
solid-state Compact Flash Card drives. Utilising fanless low cost ultra-low
power motherboards and solid-state active drives these systems are ideally
suited for 24/7 operation (i.e. 'once on always on' systems). Opus Software
Limited can provide a variety of turnkey Mini-ITX and Nano-ITX computer
systems.
The following RTU system licence groups, with databases
ranging from 5 stations and/or 250 telemetry points up to a maximum of 5 stations and/or 5,000 telemetry points, are available.
RTU/A System, Max 5 Stns and/or 250 Pnts
RTU/B System, Max 5 Stns and/or 500 Pnts
RTU/C System, Max 5 Stns and/or 750 Pnts
RTU/D System, Max 5 Stns and/or 1,000 Pnts
RTU/E System, Max 5 Stns and/or 2,000 Pnts
RTU/F System, Max 5 Stns and/or 3,000 Pnts
RTU/G System, Max 5 Stns and/or 4,000 Pnts
RTU/H System, Max 5 Stns and/or 5,000 Pnts
Entry Level Telemetry/SCADA System Licensing
The following Entry Level Telemetry/SCADA/IMS system licenses
are full featured and provide full on-line reconfiguration of the Master
station's database and operator workstation set-up. Each system is based
on the standard PC6-SQL Telemetry/SCADA/IMS Master station software with
integrated SQL based Information Management System, sophisticated Web
interface and the latest Advanced Graphic Workstation software.
These licenses are suitable for small systems and HMIs.
Entry Level systems with databases up to a maximum of 25 stations are
categorized by the following ELS/n licence groups,
ELS/A Entry Level System, Max 10 Stns and/or 250 Pnts
ELS/B Entry Level System, Max 10 Stns and/or 500 Pnts
ELS/C Entry Level System, Max 10 Stns and/or 750 Pnts
ELS/D Entry Level System, Max 15 Stns and/or 1,000 Pnts
ELS/E Entry Level System, Max 15 Stns and/or 2,000 Pnts
ELS/F Entry Level System, Max 15 Stns and/or 3,000 Pnts
ELS/G Entry Level System, Max 20 Stns and/or 4,000 Pnts
ELS/H Entry Level System, Max 25 Stns and/or 5,000 Pnts
Main Level Telemetry/SCADA System Licensing
The following Main Level Telemetry/SCADA/IMS system licenses
are full featured and provide full on-line reconfiguration of the Master
station's database and operator workstation set-up. Each system is based
on the standard PC6-SQL Telemetry/SCADA/IMS Master station software with
integrated SQL based Information Management System, sophisticated Web
interface and the latest Advanced Graphic Workstation software.
Main Level systems are categorized by the following SMn
licence groups,
SM1 Main System Licence, Max 50 Stns and/or 6,000 Pnts
SM2 Main System Licence, Max 100 Stns and/or 8,000 Pnts
SM3 Main System Licence, Max 200 Stns and/or 10,000 Pnts
SM4 Main System Licence, Max 400 Stns and/or 12,000 Pnts
SM5 Main System Licence, Max 800 Stns and/or 14,000 Pnts
SM6 Main System Licence, Max 1,600 Stns and/or 16,000 Pnts
SM7 Main System Licence, unlimited Stns, unlimited Pnts
Additional Users
Each Entry Level and Main Level system is supplied with
a single user licence that is normally allocated to the integrated workstation,
residing on the Master station's host PC. All workstation software is
supplied FOC (Free Of Charge) and can be installed on any number of user
PCs, each connected to an Opus PC6-SQL system via any form of asynchronous
or networked link. The number of workstation users supported by each
PC6-SQL
system is governed solely by the Master station's licensing. The cost
of each additional COSAGWS user licence varies according to the licence
level.
ELS/A Additional User Licence
ELS/B Additional User Licence
ELS/C Additional User Licence
ELS/D Additional User Licence
ELS/E Additional User Licence
ELS/F Additional User Licence
ELS/G Additional User Licence
ELS/H Additional User Licence
SM/n Additional User Licence
Other Options
PAGER Pager Alarm Dial Out Licence
PE Protocol Emulator Licence
FS File Server System Licence - The File Server licence enables the automated
backup of key telemetry and archive data.
Bespoke Software
Opus Software Limited will be pleased to quote for any IMS,
SQL, Web or any Windows based bespoke software development.
Warranty
Prices for extended software warranty and in-house (phone
and email) support are available on request. Extended warranty is typically
charged at rate of 10% of the system and additional user licences (minimum
charge applies). Systems including a file server are charged an additional
10% of the File Server System licence. Systems including one or more workstation
servers are charged an additional 10% of the total supported number of
user licences. Extended on-site maintenance contracts are also available
on request.
|
